Agriculture and Farm Equipment
The company started with discs and tynes gradually adding cultivators of varous designs. On date it is having full range of rigid as wel as spring loaded cultivatorsbesides adding mounted as well as trailed offset disc harrows, ploughs, levellers etc.. It has ambitious plans for complete range of agriculture impliments.at present following are our main products:
1. Discs , plain and notched
2. Disc Plough
3. Disc harrow
4. Cultivators (tillers)
5. 3 point linkage kit
6. Mould board plough
7. leveler
8. Tractor Trailers
9. Rotavator
10. Auger/Pole hole digger
11. Ridger
12. Sub soiler
13. Rotary/grass Slasher/cutter Lawn Mower
14. Chain Harrow
15. Other products
|
|
DISC PLOUGH
Regardless of ground conditions Disc Plough can handle the toughest ploughing jobs. For extremely hard ground and soil with large roots and other obstructions, one can obtain outstanding penetration performance. For soft sticky ground and sandy soil depth can be controlled through the built-in depth control. The under frame and unit-to-unit clearances are adequate to cope with trashy conditions. Perfect alignment of the sub-beams carrying the Disc bottoms is maintained by virtue of the frame construction. An adjustable and spring-loaded furrow wheel takes care of the side draft and the implement moves smoothly. Disc till angle can be varied in three stages to perform on various types of soils.
|
| |
|
MOULD BOARD PLOUGH
· Disc plough is directly mounted to the Tractor
· The plough is a hydraulically operated basic implement for the preparation of land.
· It is available in a basic 2 Boards and 3 Boards version.
· The Disc Plough is especially useful in hard, Rocky and dry trashy, stumply land conditions.
· Heavy duty frame has high trash clearance allowing the plough to operate under heavy crop residual.
|
| Top |
|
DISC HARROW
· The Offset Disc Harrow is a mounted, hydraulically operated implement suitable for attachment to tractors having either category 1 or 2 linkage.
· The Disc Harrow is designed for work in Orchards, Groves and Vineyards, in addition to regular field harrowing.
· Its rigid construction and depth of penetration adapts heavy harrowing in tough soils, whilst unit attachment to the tractor with working depth controlled hydraulically, ensures easy harrowing in small areas and corners.
· The Harrow has 12 & 14 Discs of 20" or 22" dia in two gangs, front Discs are notched and rear discs are plain. The front gang may be moved right or left, to a maximum of two feet in relation to the hitch frame.
· The rear gang may also be moved right or left to a maximum of two feet in relation to the front gang, thus giving a maximum offset of four feet.
· There are three positions for crank attachment on the rear member of the front gang. Positioning depends on amounts and direction of offset required.
|
 Mounted Disc harrow
Trailing type disc harrow
| Top |
|
CHAIN HARROW
We are manufacturing chain harrow in single tine and variable tines in sizes 4'feet, 5feet,6feet and 8 feet and as required by the party in bigger lengths.
|
| Top |
|
BROHAWK TIPPING TRACTOR TRAILORS
SPECIFICATION TIPPING TRACTOR TRAILOR
LOADING CAPACITY 3-5 TONS
SIZE 10’ x 6’ x 1.75’ FROM OUTSIDE
- Main Chassis -- 150 x 75 m.m. M.S. Channel
- Second Chassis -- 100 x 50 m.m. M.S. Channel
- Cross Bar Supports -- 75 x 40 m.m. M.S. Channel
- Floor Plateform Sheet -- 3 m.m. Plate
- Side Wall Sheet -- 2 m.m. Corrugated Sheet
- Front Door – Fixed bybolts and nuts, Removable.
- Side and rear door -- Both side Drop down and rear drop down and removable.
- Hitch beam – 125 x 65mm M.S Channel.
- Toe Eye – Forged steel made of 45mm thickness.
- Axle – 75mm square water proof bearing.
- Axle bearing – 32213 inner and 32211 outer
- Wheels – 2 no’s 7.50 x16/9.00x16
- Hydraulic jack – 5 tone capacity heavy duty double stage tipping arm.
- Construction -- All welded heavy duty steel construction and bolted in required places.
- Painting – One coat of red oxide primer and 2 coats of enamel paint frinish.
|
| Top |
|
AUGER/ POLE HOLE DIGGER
The Brohawk digger is built to deliver outstanding performance in many industrial, commercial and agricultural applications including digging in soil, tree plantation, pole digger and others.
The auger is available in size 9” to 36”. Auger is made of high carbon steel and the blade is made of 3/8” thickness and H.C steel for greater strength.
|
| Top |
|
CULTIVATORS(TILLER)
These tillers are available as light & heavy duty tillers
· This Tiller has 7,9,11,13 or more tines, which are mounted in two rows one behind the other at center distance of 9".
· Each tine is mounted with two strong coil spring which allow the tine to ride over obstructions in the soil without the inconvenience of stopping the work to clear the obstacle, thus making it suitable for use in stone and root obstructed soil.
· The tiller is fitted with 2 ½" reversible shovels. This tiller is light in weight and extremely hard and earth wearing because parts are made out from special steel duly hardened & tempered.
· The implement is suitable for preparing seed bed quickly and economically because it can loosen the soil to a depth of nine inches and eliminates the use of the plough.
· In the tool bar holes are provided which enables both front and rear tines to be spaced as desired for either row crop or general cultivation work.
|
| Top |
|
LEVELER
Brohawk land leveler are ideal for leveling , filing, back fillings, farm yard cleaning etc. Soil retaining wings can be optionally fitted on both ends of the blade for carrying the soil without spillage. It is suitable for non sticky soils.
|
 |
Top |
3 POINT LINKAGE KIT
3 point linkage is made for small tractors ranging fron 10 H.P to 25 H.P. It can be fitted behind Kubota tractor, Issiki Tractor or any of the small tractor series. The 3 point linkage kit is coated with non corrosive paint and heavily electroplated.
|
 |
Top |
ROTAVATOR TILLER
Applications :
Brohawk Rotary Tillers are designed to suit every kind of soil for preparing fine seed beds for root crops, orchards, fodder crops and cash crops etc. only in one or two passes. It enhances the soil fertility by mixing the residue of crops like Cotton, Sugarcane, and Wheat etc. It can be applied in dry and wet soil and can be used for puddling.
Features :
- Specially designed L- Blades, having a longer life & requires less maintenance.
- Choice of Side chain drive or gear drive.
- PTO shaft with shear bolt system, to avoid damage to Rotary Tiller & Tractor due to overload.
- Last flange from both the side contains 3 blades and all the middle flange contains six blades.
- Depth can be controlled by depth skid.
- Spring loaded adjustable trailing board
MODEL |
|
|
|
|
|
|
Name |
CM |
CM |
HP |
Kg (approx.) |
Nr. |
R.P.M |
FK 125 |
155 CM |
125 CM |
35 - 40 |
297 |
30 |
540 |
FK 150 |
180 CM |
150 CM |
40 - 45 |
337 |
36 |
540 |
FK 175 |
205 CM |
175 CM |
45 - 55 |
377 |
42 |
540 |
FK 200 |
230 CM |
200 CM |
55 - 65 |
417 |
48 |
540 |
|
 |
Top |
RIDGER
It is an implement, which cuts and turns the soil in two opposite directions simultaneously for forming ridges. It is also used for earthing up operation.
The ridger body consists of two moldboards, share, and point and tie bars to vary the wingspan of ridger. The share point is robust and replaceable; made of high carbon steel, hardened and tempered for long life. The depth can be adjusted by the clamping mechanism in the ridger shanks.
|
 |
Top |
SUB SOILER
Sub Soiler agricultural machinery is used to break the lower impermeable hardpan, which cannot be broken by normal cultivation operations.
Successful subsoiling loosens and shatters compact soil layers by creating many cracks and fissures thus allowing roots to develop more freely and water to move down more rapidly. This rather inexpensive implement provides a simple and economical way to obtain good crop yields and profits.
- Below Shovels easily replaceable & are fully hardened.
- Maximum Penetration 1.2 meters.
- In this Implement from 1 to 5 Rows are available
- Tractor Horse Power required - 35 HP per Row
- 3 point linkage - Category 2
- Nuts & Bolts - High Tensile
|
 |
Top |
ROTARY/GRASS SLASHER/STUB/GRASS CUTTER (Lawn Mover)
The Grass Cutter Mower Horizontal slashing is the most versatile method of grass cutting. Rotary slasher is powerful enough to cope with tall weeds and small bushes , yet giving a fine cut on turf areas. Mounted with front and rear rollers scalping is minimal. Tractor mounted rotary slasher provide a very cost – effective grass cutting solutions.
Specifications
Cutting width: 1.5m, 1.65m and 1.8m ( 3 Models)
Skid adjustments : adjustable or fixed
Cutting height: 25 to 100mm
Total height: 570mm
PTO Speed : 540 rpm
Category-3 point linkage: Cat1 & Cat2 narrow
Shredding chain: more than 10 nos
Blades: Straight
Rear Wheels: Adjustable for height
Nuts and Bolts: high Tensile
|
 |
Top |
HARROW DISC DETAILS
Holes available
1. Square
2. Hex
3. Round
4. Round with key slot
5. Round and square combined
6. Octagan
Types of disc
1. Plain harrow disc
2. Notched disc
3. Plough disc
|
  |
Top |
|
HARROW DISC PLAIN AND NOTCHED
|
|
SIZE
|
CONCAVITY
|
THICKNESS
|
|
MM
|
INCH
|
MINIMUM
|
MAXIMUM
|
MM
|
|
355.6
|
14
|
30
|
34
|
3
|
|
381
|
15
|
34
|
38
|
3
|
|
406
|
16
|
38
|
42
|
3
|
|
457
|
18
|
46
|
50
|
3
|
|
457
|
18
|
46
|
50
|
3.5
|
|
508
|
20
|
60
|
64
|
3.5
|
|
558
|
22
|
69
|
73
|
4
|
|
558
|
22
|
69
|
73
|
4.5
|
|
558
|
22
|
69
|
73
|
6
|
|
609
|
24
|
81
|
85
|
4.2
|
|
609
|
24
|
81
|
85
|
4.8
|
|
609
|
24
|
81
|
85
|
5
|
|
609
|
24
|
81
|
85
|
6
|
|
660
|
26
|
103
|
107
|
6
|
|
660
|
26
|
103
|
107
|
7
|
|
660
|
26
|
103
|
107
|
8
|
|
711
|
28
|
113
|
117
|
6
|
|
711
|
28
|
113
|
117
|
7
|
|
711
|
28
|
113
|
117
|
8
|
OTHER PRODUCTS
We are also manufacturing different kind of other farm and
agriculture machinery as per the specifications of buyer. Some of the
products are as under.
1.Potato Planter
2.Potato digger
3.Seed cum fertilizer
drill
4.Rotavator
5.Rotavator blades and shovels
6.Top link,
Lift arm, Tiller pins, Lynch Pins, Bent pins,Top link pin, Hitch pin,
Lower link pin
Photographs: 2 attached and rest are in More product Pictures
|
|
Top |
|
|
|
|
|
|
